Utilities get control of stock across remote depots and substations by recording every movement at the point it happens, using mobile and barcode-enabled transactions, within one inventory system that models each depot, store, van and site as a distinct location. Combined with cycle counting, replenishment rules and links from stock to projects and work orders, that gives an accurate, real-time picture of what is held, where, and what it is committed to.
For a network business, inventory is not a warehouse problem in the usual sense. Materials are spread across regional depots, satellite stores, vehicles and operational sites, often far from any central office. Cable, fittings, meters, switchgear and spares move constantly between locations, to jobs and back again. Much of that movement happens in the field, at the end of a long day, and much of it is still recorded on paper or in local spreadsheets, if it is recorded at all.
The result is familiar to most operations and finance leaders: stock that the system says exists but cannot be found, stock that exists but is not on the system, emergency purchases of items already held elsewhere, and month-end adjustments nobody can fully explain. This article sets out how utilities can close that gap.
Why is inventory control so hard for utilities?
It is hard because the operating model works against central control. Stock is held in many small locations rather than a few large ones. The people moving it are engineers and field teams whose priority is the job, not the paperwork. Connectivity at some sites is limited. And demand is shaped by both planned work and unplanned faults, so stock must be available quickly in places that are hard to predict.
When recording relies on manual entry after the event, every one of those factors erodes accuracy. A van restocked from a depot without a transaction, a part used on a fault and never booked, an item returned and put on the wrong shelf: each is small, but together they make the inventory record unreliable. Once people stop trusting the record, they start holding their own buffer stock, which makes the problem worse.
Why does this matter more now?
Because network investment is rising. As networks expand and reinforce to support electrification, the volume and value of materials flowing through depots increases, and so does the cost of getting inventory wrong. Electricity distribution businesses are also entering a new price control, ED3, from April 2028, which brings renewed scrutiny of how efficiently they deliver investment.
Inventory accuracy affects that efficiency directly. Inaccurate stock delays jobs, drives emergency purchasing at premium prices and distorts the capital and operating cost data that regulatory reporting relies on.
There is a workforce dimension too. As experienced storekeepers and engineers retire, knowledge of where things are kept and how stock really moves leaves with them. Systems that record that knowledge as structured data protect the organisation against it walking out of the door.
What does good inventory control look like?
Good inventory control means the system record matches physical reality closely enough that people trust it and act on it. In practice, that rests on five capabilities.
1. Every location modelled. Each depot, store, van and operational site holding stock is set up as a distinct location in the inventory system, with bins or locators where useful. Stock that is not in a modelled location cannot be controlled.
2. Transactions at the point of activity. Receipts, issues, transfers and returns are recorded when and where they happen, on a mobile device, rather than written down and keyed in later.
3. Barcode and scan-based recording. Scanning item, location and, where relevant, serial number labels reduces errors and makes recording quick enough that field teams actually do it.
4. Continuous counting. Cycle counting, prioritised by value and movement, replaces reliance on an annual stock-take and catches discrepancies while they are still explainable.
5. Rules-based replenishment. Minimum and maximum levels, reorder points and transfer rules keep each location stocked appropriately, with requisitions raised automatically rather than by individual judgement.
How should mobile recording work in the field?
Mobile recording should be designed around the person doing the work, not the system. That means short, scan-led transactions that take seconds; screens that work on rugged devices and in poor light; and support for limited connectivity where sites have weak signal, with transactions synchronised when a connection returns.
It also means deciding who records what. Depot staff may handle receipts and transfers; field engineers may record issues to jobs and returns from site. Clear roles and simple processes matter more than technology. If recording is slow or confusing, it will not happen.
How should stock link to projects and work?
Stock should never move in isolation. When materials are issued, they should be charged to the project, work order or cost object they support. That link is what allows a utility to see the true material cost of each job, to capitalise materials correctly on investment work and to report costs accurately to the regulator.
Where materials are reserved for planned investment, those reservations should be visible in the inventory record, so the same stock is not promised twice. Planning that aligns material demand with the investment programme helps depots hold what upcoming work needs, rather than what was needed last year.
What about serialised and high-value equipment?
Serialised and high-value items, such as meters, transformers and switchgear components, need tighter control. Serial number tracking from receipt through installation creates a traceable history for each item, supports warranty and failure analysis, and links the stock record to the asset record when the item is installed.
The handover from inventory to fixed assets is a common point of failure. Designing that transition explicitly, so that installed equipment becomes an asset with the correct cost and location, avoids gaps between what stores issued and what the asset register shows.
How should returns, scrap and disposals be handled?
Returns and disposals are often the least controlled part of the inventory lifecycle. Materials come back from site unused, partly used or faulty, and some items require specific handling for environmental reasons. A controlled returns process records the condition of each item, routes it to stock, repair or disposal, and keeps an auditable trail. That protects inventory value and supports environmental compliance.
How do you implement it successfully?
We recommend four principles for implementation:
- Start with the location model and data. Agree every stock location and cleanse item data, including descriptions and units of measure, before migrating balances.
- Count before go-live. A full, reconciled count of migrated stock is the foundation of trust in the new system.
- Design with depot and field teams. The people who move stock should shape the mobile processes they will use.
- Measure accuracy from day one. Track count variances, emergency purchases and stock-outs, and use them to target training and process improvements.
Oracle Fusion Cloud SCM supports these capabilities through inventory management features such as multiple organisations and locators, cycle counting, min-max planning, serial control and mobile transactions; the right configuration should be confirmed against current product documentation and tested with field users during design.
The bottom line
Inventory control in a utility is won or lost at the depot door and the van tailgate. When every movement is recorded quickly and accurately where it happens, linked to the work it supports and checked continuously, the inventory record becomes something people trust. That trust reduces emergency purchasing, speeds up jobs and strengthens the cost data behind regulatory reporting. At VE3, we design supply chain processes in Oracle Fusion with the people who use them, so control at the centre starts with simplicity in the field.